Programmable UV Flood Curing Lamp
• System Timers • Lamp Intensity Control • Standby Mode • Status Indicators 

The INCURE F200P is a programmable UV flood curing lamp. F200P integrates all system components into a small lamp head which can be easily mounted anywhere on a factory floor, with virtually no cabling or remote control boxes required. Just mount the head, connect the AC line cord, and start timed exposure curing! The system contains an integrated retractable shade type shutter, which allows for repeatable exposure timing, and shields the user from UV radiation. The system’s LCD display and digital keypad make programming and monitoring of curing operations a snap. The long life 600-Watt metal halide type lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed 200mW/cm2 UVA light (320–390nm). The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver. 


 Model F100P F200P
 Order Number  290017 290007
 Input Voltage 90-132/180-265VAC
 Input Current, 120/240V 7A/3.5A maximum 10A/5.0A maximum
 Source Input Frequency 47 Hz to 63 Hz
 Lamp Power Regulation ± 1%
 Fan / Auxiliary Voltage 24V
 Lamp Type 400 watt metal halide 600 watt metal halide
 Arc Length 32 mm
 Burning Position Horizontal
 Radiation Flux 72 Watts (315 - 400 nm) 110 Watts (315 - 400 nm)
 Warm-up Time 2 minutes
 Cooling Time Before Restart   5 minutes typical
 Curing Area  8 x 6'' minimum 
 Lamp Life 1000 hours typical
 Operating Temperature +10°C to +40°C
 Relative Humidity 30 to 75% operating, 10 to 100% storage
 Cooling Convection
 L x W x H  11” x 10” x 9” / 27.94cm x 25.4 x 22.86cm
 Weight 13 Pounds / 5.90 Kg
 Package L x W x H  15.75” x 14.57” x 12.60” / 40cm x 37cm x 32cm
 Package Weight 15.54 Pounds / 7.05 Kg
Download  Bulletin for F200P Programmable UV Light Curing System (119 KB)