|
![]() |
|
F100/F200 | ||
Compact UV Flood Curing Lamp • Auto-Range AC Line Input • Standby Mode • Elapsed Hour Meter • Forced Air Cooling |
||
The INCURE F100/200 is a compact UV flood curing lamp. F100/F200 integrates all system components into a small lamp head which can be easily mounted anywhere on a factory floor, with virtually no cabling or remote control boxes required. Just mount the head, connect the AC line cord, and start curing! The long life 400/600-Watt metal halide type lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed 100mW/cm2 UVA light (320–390nm). The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver. The head features a convenient carrying handle and sliding height adjustment bracket. | ||
![]() |
Model | F100 | F200 |
Order Number | 290005 | 290033 |
Input Voltage | 90-132/180-265VAC | |
Input Current, 120/240V | 7A/3.5A maximum | 10A/5.0A maximum |
Source Input Frequency | 47 Hz to 63 Hz | |
Lamp Power Regulation | ± 1% | |
Fan / Auxiliary Voltage | 24V | |
Lamp Type | 400 watt metal halide | 600 watt metal halide |
Arc Length | 32 mm | |
Burning Position | Horizontal | |
Radiation Flux | 72 Watts (315 - 400 nm) | 110 Watts (315 - 400 nm) |
Warm-up Time | 2 minutes | |
Cooling Time Before Restart | 5 minutes typical | |
Curing Area | 8 x 6'' minimum | |
Lamp Life | 1000 hours typical | |
Operating Temperature | +10°C to +40°C | |
Relative Humidity | 30 to 75% operating, 10 to 100% storage | |
Cooling | Convection | |
L x W x H (inches) | 11” x 10” x 9” | |
Weight (lbs.) | 13 Pounds | |
Download Bulletin for F100/200 UV Flood Curing Systems (119 KB) |